#Ip cam iphone how to
#Ip cam iphone software
#Ip cam iphone password
#Ip cam iphone Pc

When you setup a port forwarding rule, you create a controlled hole in your firewall. Basically, no outside traffic is allowed into your network. In the above diagram, the red line represents the firewall provided by the router. Port forwarding is what enables you to access your camera remotely over the Internet.

#Ip cam iphone how to

Consult with your router’s manual on how to setup IP reservations for your specific model. This is important because your port forwarding rule that you will setup will not work if the IP address of the camera changes. By reserving an IP for your camera, if your router looses power or needs to be re-booted, that same IP will always be assigned. Congratulations, you just accessed your camera on the LAN.Īfter confirming that you can access the IP camera on the LAN (local area network), you should reserve that IP address specifically for your IP camera.

#Ip cam iphone password

Enter the default ID and password and you should see a live view of your camera or a configuration screen.

If the address and port is correct, you will most likely be prompt for a user ID and password by your camera. In our example, would enter the following address into the web browser of the laptop on the right. Most IP cameras have an interface that can be accessed via web browser. IN our example, we are using a laptop on the local network with IP address 192.168.0.2.

Using a computer on the same network as your IP camera, login to your IP camera.

#Ip cam iphone software

If yours does, run this software to locate the IP address of your camera and make note of it.

#Ip cam iphone Pc

Most IP cameras include PC software to search your network for IP cameras. If you are unsure, plug your camera into your router and power it on. You need to check your camera’s manual to confirm. Most IP camera manufacturers have their cameras setup to use DHCP by default, but some have a static IP address assigned to their cameras. Our IP camera was assigned IP address 192.168.0.101.

This is known as DHCP (Dynamic Host Configuration Protocol). Typically, when you connect an IP camera to a router and power it on, the camera is assigned an IP address by the router.

Please note that you can change your camera’s port when you login to it. Check your manual to confirm the port that your camera uses. Please note that different IP camera manufacturers use different default ports.

Our IP camera is running on port 7000.

This modem can be a cable, DSL, direct fiber, or any other type of high speed Internet modem.īefore you setup port forwarding for remote access, you should first connect to your cameras on the LAN (local area network).

The network router is hard wired to the Internet modem using CAT5 Ethernet cable.

The laptop on the right is also hard wired to the same router.

The IP camera in the upper right is hard wired to a network router using CAT5 Ethernet cable.

The red line in the middle represents the firewall that separates the local network from Internet.

The laptop on the left of the red firewall is at a different location than the IP camera and not connected to the same network. The laptop on the left can be located anywhere in the world as long as it is connected to the Internet.

All of the devices on the right of the red line are on the local network where the camera is located.

Network Diagram / Wiring Installation Explanation Here is and explanation of how it works using the above network diagram to explain.

Please note that although this article focuses on IP cameras, the process and concepts are the same for network video recorders and security camera DVRs. Setting up port forwarding for multiple IP cameras is also covered. This article explains ports forwarding and dynamic DNS – two concepts to understand if you want to access security cameras remotely. UPnP (universal plug-and-play) is a newer method that is supported by some routers and cameras but is not as reliable in my experience. The most common way to enable remote viewing to IP cameras is by manually setting up port forwarding on the network router that the camera is connected to. Accessing cameras remotely from desktop software (Mac and Windows) and mobile apps (iPhone and Android) is extremely common for home owners and business owners. Most users of IP cameras (network security cameras) want to access their camera remotely to see live video.